Want to see your ad here? Ask us how.

You are browsing the archive for Chris-Craft for sale | Port Carling Boats - Antique & Classic Wooden Boats for Sale.

by Rob

A recently sold and “unsold” boat.

September 24, 2020 in Uncategorized

Congratulations to the buyer and seller of this 1960s Peterborough,
The asking price on this 14 footer was $2200.

Oops We goofed.
We had recently listed this  boat  (below) as sold.   Luckily, it is still available!
This 20 ft.  1954 Chris-Craft Holiday is listed at $22,500  CAD, and according to the owner, is in EXCELLENT condition
See see ad number pb900-2
Additional photos below

by Rob

Our newest listing: a Chris-Craft Capri, 21′, 1956

July 17, 2017 in Uncategorized

Chris-Craft Capri: 21 ft, 1956N
The Capri features a new, no-soak bottom by Don Danenberg in Manistee, Michigan. Video disks of bottom rebuild in hand. Needs refasten/refinish above bottom rebuild on hull. Kerfs are 3/16 ” wide to address rough kerf finish. Instruments function and look good. Chromed surfaces look decent. Needs new cover boards on each side of cockpit to accommodate windshield position. stainless steel. gas tank The Capri comes with a 6 cylinder, 158 mbl motor which has been disassembled to deal with a cracked block.  Also included in the sale is a tandem axle (sprung) trailer iwht surge (disk) brakes
Price:  $20,000.  For further details and contact information, please click on the link  Ad number pb751 Additional photos below.

by Rob

Price reduction on pristine Chris-Craft Reproduction: 19.5′, 2013

July 4, 2017 in Uncategorized

We have been instructed by the owners to reduce the price on this recently built Chris-Craft reproduction from $55,500, to $49,500.  Please see details below.

Reproduction Chris-Craft Barrelback runabout: 19.5 ft.(plus swim platform) 2013
This 2013 contemporary reproduction is modeled after a 1939 Chris Craft Barrelback.
Built by Reets Boatworks, Mayfield, NY USA.
Includes Searra Custom Trailer, single axle with surge brake.

** Selling to purchase a boat more suited for the family. **

Double layer of crisscrossed 1/4″ marine grade plywood with carbon fiber cloth sandwich, joined with West System epoxy.
3/8″ minimum thickness bookend laid Philippine mahogany outer layer
Interior coated with West System epoxy
All joints sealed with Sikoflex
10+ coats of varnish
Mercruiser Scorpion 350 cubic inches, 330 HP V8
All new chrome plated brass fittings
Castings: Bud Bracken, Maine Classics
Chrome plating: Graves, Alabama
33 gallon aluminum fuel tank
Varnish: Petit Z-Spar Flagship
Bottom paint: Petit hard racing paint, PET-1959Q
This is a 2013 contemporary reproduction modeled after a 1939 Chris Craft Barrelback. Built by Adam Retersdorf, owner of Reets Boat works in Mayfield, NY.
The hull is a double layer of crisscrossed , 1/4″ marine grade plywood with a layer of carbon fiber cloth between, overlain with a 3/8″ minimum thickness bookend laid Philippine mahogany outer layer. All layers are joined with West System epoxy. The interior is coated with West System epoxy and all joints are sealed with Sikoflex.
Power is a Mercruiser Scorpion 350 cubic inch, 330 HP V8.
Fittings are all new chrome plated brass, with the casting done by Bud Bracken of Maine Classics, and the chrome plating by Braves of Alabama. Boat is 19.5 feet plus swim platform.
Swim platform was added to the design.
Trailered to shows and lakes. Maintained by, and Winter stored
Boat has been shown at many ACBS Boat shows. Contemporary 2nd place at Winnipesaukee Boat Show 2015.

DELIVERY: Available for local pick up. Will deliver within a reasonable distance.
Price: $49,500.  For contact information please click on the link. Ad number pb716

by Rob

Our newest listing: a twin engine Chris-Craft Sportsman, 27 ft, 1962

September 23, 2016 in Uncategorized

Chris-Craft Sportsman: 27 ft, 1962
Notes from the owner:
“I have up for sale my 1962, 27 ft, Twin Engine, plywood lapstrake hull , Chris-Craft Sportsman. This open launch hull is in excellent condition, having been kept in a barn most of the time since 1962. Has prime coat on outer hull. Varnish has been removed for staining and re-coating. Engines are not seized, (twin Gray 283’s.) One was rebuilt only a few hours on it. Needs new upholstery. Nautolex decking is secure. Has cuddy cabin. Only requires cosmetic restoration. One of 240 built. Perfect boat to keep up in the boat house for that special evening or excellent guest conveyance for a 5 star resort. Boat is located north of Toronto, in Barrie Ontario.”
Note: A tandem axle trailer with new tires, rims and bearings is available for purchase. Also, The drive shafts and props come with the boat.
Price: $9,800 For contact information, please click on the link. Ad number pb718 (More photos below).



by Rob

Friday May 23, 2014

May 23, 2014 in Uncategorized

Chris-Craft Sea Skiff, 24 ft, 1964.
The owner of this versatile Sea Skiff has forwarded additional photos of the boat (below). The Chris-Craft was originally priced at $16,000. If you missed a previous post, the price has been dropped to $10,000 WOW! This is a lot of boat for the money. The Chris will handle heavy water and would make an ideal work boat, fishing, or scuba diving vessel with it’s very wide beam and spacious rear cockpit. The boat has been received regular maintenance/repairs as required. Powered by a Chevy 283 V8 engine, it comes with an auxiliary Evinrude 15 hp. outboard.
A marine survey in 2013 revealed that the Chris is in good condition. For further details, please see ad number pb334 on the Classic/Antique Boats page, or click on the link. pb334

Port Carling Boats – Antique & Classic Wooden Boats for Sale